Lutron RadioTouch Components >> Interfaces

Control	Model Numbers	Description
Interface for incandescent and magentic low voltage lighting	FDI-INC-2000	Connects RadioTouch controller to an incandescent or magnetic low voltage lighting circuit; 2000W capacity. Junction box or 2-gang backbox mounted. Requires 120V power.
Interface to Lutron Tu-Wire ballasts	FDI-FTU-16A-120	Connects RadioTouch controller to one Tu-Wire ballast fluorescent lighting circuit; 16A capacity. Junction box or 2-gang backbox mounted. Requires 120V power.
Interface to electronic low voltage ligthing.	FDI-ELV-1000	Connects RadioTouch controller to an electronic low voltage lighting circuit; 1000VA capacity. Junction box or 2-gang backbox mounted. Requires 120V power.
Contact Closure Interface to Sivoia QED Controllable Window Treatments	SVQ-CCI-8	Provides master control of up to 95 Sivoia QED (Quiet Electronic Drive) Controllable Window Treatments.
RS-232 Interface	RTA-RS232	Controls up to 10 lighting zones, Sivoia QED Controllable Window Treatments, or contact closure outputs (with RS-232 compatible equipment) Connects to RS-232 data link through either a DB-9 plug or terminal blocks Powered by plug-in power supply (included). Can provide feedback to the host device that RF commands are being transmitted. Operates with both 3 Wire software flow control or full 7 Wire hardware handshaking.
Switch Closure Input Interface	RTA-SCI	Accepts up to 5 momentary dry contact closures to control lights, Sivoia QED Controllable Window Treatments, or AC Motorized Window Treatments. Ideal for interfacing to timeclocks or Building Management Systems (BMS). Powered by plug-in power supply (included). Allows multiple RTA-SCI devices to be used in building sweep applications.
AC Motor Group Controller	WC-2M-GC WC-4M-GC	Provide individual or master control of up to two or four (depending on model) AC Motorized Window Treatments or projection screens. Requires 120V power.