Control Technologies

Forward Phase - Also known as leading edge, incandescent, MLV, or triac-based dimming. The vast majority of dimmers installed today are this type. This is a line-voltage dimming method.
Reverse Phase - Also known as trailing edge, ELV, or FET-based dimming. Luminaries with electronic supplies are best controlled with these types of dimmers.
3-Wire - A line-voltage dimming method where power is delivered over a dedicated Switched Hot wire, and the phase control dimming signal is sent over a separate line-voltage Dimmed Hot wire.
0-10V - A low-voltage dimming protocol defined in IEC standard 60929-E2. Luminaries that use this standard provide a voltage, which the control forces to 10V for high end and 1V for low end. All fixtures on the same 0-10V link must go to the same light level.
PWM - A low-voltage dimming protocol defined in IEC standard 60929-E3. It uses the duty-cycle of a signal to communicate light level to a fixture. All fixtures on the same PWM link must go to the same level.
DMX - A low-voltage dimming protocol, formally called USITT DMX512-A. It provides high-speed individual control of up to 512 fixtures over a digital link.
EcoSystem - A digital protocol developed by Lutron and based of the DALI standard (IEC60929-E4). It provides individual fixture control for up to 64 fixtures over a digital link.
Switched - Fixtures designated as Switched are unable to be adequately dimmed with Lutron dimmers.

Lutron Product Delivery Lead Time Update

Discover Lutron Luxury

Specification Guides

New Lutron Support Center

Lighting Control Institute

LED Control Center of Excellence

CEU is currently down for maintenance. Please check back later.

How can we help you today?

Popular Topics