| DBDT Monitor String | Dimmer Button Double Tap Monitor String |
Syntax
DBDT, <address>, <button number>
| Parameter | Description | Format |
| address | system address of the H48 or RF dimmer/switch | see device address formatting description |
| button number | button number that was double tapped | 1 |
Description
The DBP monitor string is output from a processor when the tap switch for an H48 dimmer/switch is double tapped.
It is output from a processor when the tap switch for an RF dimmer/switch is double
tapped only if the dimmer has keypad-like programming. This string is not generated when the tap
switch for a D48 dimmer/switch is double tapped.
Example
Someone double taps the H48 tap switch on processor 1, link 4, router
1, bus 3, dimmer 2.
DBDT, [01:04:01:03:02], 1
Someone double taps the programmed RF tap switch on processor 1, link 8, dimmer 54. (The device type is 1 for all RF dimmers/switches.)
DBDT, [01:08:01:54], 1
See Also
DBP
Monitor String
DBR Monitor
String
DBH Monitor String
KBMON - Keypad
button monitoring on
KBMOFF - Keypad
button monitoring off