| DBP Monitor String | Dimmer Button Press Monitor String |
Syntax
DBP, <address>, <button number>
| Parameter | Description | Format |
| address | system address of the H48 or RF dimmer/switch | see device address formatting description |
| button number | button number that was pressed | 1 |
Description
The DBP monitor string is output from a processor when the tap switch for an H48
or RF dimmer/switch is pressed. This string is not generated when the tap switch
for a D48 dimmer/switch is pressed nor when the raise/lower rocker for any
dimmer is pressed.
Example
Someone presses the H48 tap switch on processor 1, link 4, router 1,
bus 3, dimmer 2.
DBP, [01:04:01:03:02], 1
Someone presses the RF tap switch on processor 1, link 8, dimmer 54. (The device type is 1 for all RF dimmers/switches.)
DBP, [01:08:01:54], 1
See Also
DBR Monitor
String
DBH Monitor
String
DBDT Monitor
String
KBMON - Keypad
button monitoring on
KBMOFF - Keypad
button monitoring off