Device Address Formatting

Every physical device in the system (RPM zone, D48 zone, GRAFIK Eye, etc) has a system device address.
Each device address is separated into 3-5 elements as shown in the tables below
Device address elements are listed in the order shown, separated by a period, colon, slash, backslash or dash.
The entire device address may be enclosed in [brackets] if desired.
All letters and spaces in the address are ignored and may be used to improve readability
Examples of device address formats for Processor 1, Link 1, Module Interface Address 3, RPM Module 2, RPM zone 4

[01:01:03:02:04]

1:1:3:2:4

1.1.3.2.4

1/1/3/2/4

[proc 1 : link 1 : mi 3 : module 2 : zone 4]

RPM Dimmer/Switch

Processor

Link

Router (MI)

Module

Output

1-16

1

0-15

1-8

1-4

D48 Dimmer/Switch

Processor	Link	Router (D48)	Bus	Dimmer
1-16	4-6	1-4	1-12	1-4

H48 Dimmer/Switch

Processor	Link	Router (H48)	Bus	Dimmer
1-16	4-6	1-4	1-6	1-8

RF Dimmer/Switch

Processor	Link	Device Type	Dimmer
1-16	8	1	1-64

RF Keypad

Processor	Link	Device Type	Keypad
1-16	8	2	1-32

RF Repeater

Processor	Link	Device Type	Repeater
1-16	8	3	1-4

Keypad/Sivoia Control/CCO/CCI/TEL-9

Processor	Link	Keypad
1-16	4-6	1-32

RS232 Port

Processor	Link	Port
1-16	3 or 7	1

GRAFIK Eye Main Unit

Processor	Link	GRAFIK Eye
1-16	4-6	1-8

GRAFIK Eye Main Unit Single Zone

Processor	Link	GRAFIK Eye	Output
1-16	4-6	1-8	1-8