| FLASHDIM | Flash a dimmer |
Syntax
FLASHDIM, <intensity>, <flash rate>, <address
1>, ..., <address n>
| Parameter | Description | Format |
| intensity | Intensity to flash the dimmers to | 0 - 100 (percent) |
| flash rate | The amount of time the dimmers are on/off | HH:MM:SS example: 00:00:05 for 5 seconds see time formatting description if omitted, flash rate defaults to 2 seconds |
| address | system address of zones to fade | [processor : link :
address] maximum of 10 address per command see device address formatting description |
Description
Starts flashing one or more system
zones at a specified rate. The dimmer is flashed between the
specified intensity and Off.
Example
Start flashing processor 1, link1, MI
address 0, RPM module 2, zone 3 once a second
L232> FLASHDIM, 100, 1, [1:1:0:2:3]
See Also
STOPFLASH -
Stop flashing a system dimmer
FADEDIM - Fade a
system dimmer
RAISEDIM - Raise
a system dimmer
LOWERDIM - Lower
a system dimmer
STOPDIM - Stop a
dimmer raise/lower