Touch the Toggle Region of the LED bar to turn the lights on to the previous light level used or a preset favorite light level. The LED bar will brighten at your touch and click softly. The LED bar will then dim to a softer level when at rest indicating the current light level.

When the lights are off, turn the lights on to your preferred level with one touch by simply touching anywhere along the Active Region of the LED bar. The lights will automatically come on to the level corresponding to your touch.

With Vierti, you can adjust the light level both as you turn the lights on and after they are already on by simply touching or sliding your finger along the Active Region of the LED bar.

Touch the Toggle Region of the LED bar to turn the lights off. The LED bar will brighten at your touch and beep softly to let you know its working. As you release your finger, a soft amber glow will appear in the Toggle Region of the LED bar to indicate that the lights are off. This will also allow you to easily find your dimmer in a dark room. The Active Region of the LED bar will glow softly so you can see the previous light level used or the preset favorite light level.

With Vierti, you can activate a delay-to-off feature, which provides you 30 seconds to cross a room or get into bed before your lights begin to fade gently to off. Simply touch and hold anywhere along the LED bar until the LEDs begin to blink. For added convenience, you can shorten or extend the delay-to-off wait time with Vierti’s Advanced Programming mode.