With Vierti’s Advanced Programming Mode (APM), you can customize your dimmer to meet your personal preferences.

Adjust the high end trim to save energy by setting the maximum light level lower than full bright for automatic energy savings. Check out Lutron’s energy website to see how dimming even 15% can save 15% energy and extend your bulb life 4 times. Set the minimum light level to ensure that artwork or architectural structures are always properly lit for ambiance.

You can set Vierti’s LED bar brightness to low, medium, or high to fit the application. You may need high brightness in already bright rooms such as a well-lit office or public space. Low brightness may be more appropriate in a room that you’d typically keep dark, such as a home theater.

By saving your favorite light level, called a locked preset, you can return your lights to that level quickly and easily with a simple touch of the toggle region.

By pressing and holding the LED bar, Vierti dimmers provide a default 30 second delay-to-off wait time, allowing you to cross a room safely before your lights fade to off. Decrease the delay to only 10 seconds for a short hallway or set a 70 second delay to allow more time to settle into bed.

Make your lights fade on gradually with a maximum of 5 seconds, or choose a fast fade on with a half second fade from off to full bright.

Make your lights fade off gradually with a maximum of 15 seconds for more relaxing transitions, or choose a fast fade to off with a half second fade from on to off.

Vierti dimmers provide audible feedback when touched. You can choose to turn the sound off if you prefer.

APM instructions