| Lutron offers a free occupancy sensor design and layout service to help you with selection and layout of Lutron occupancy sensors. Download and complete the Layout Request Form (Below) and email to occsensorlayouts@lutron.com along with your AutoCAD drawings for areas requiring sensor placement. |
| |
| Occupancy Sensor Design & Layout Request Form (.pdf) |
| |
| What we require: |
| All drawings submitted to Lutron must be in AutoCAD (.DWG) format. All other file types are not usable, It is important that your drawings provide as much detail as possible to help accurately place your sensors. Room names, walls, ceiling fixtures, ceiling ventilation and sprinkler heads are few examples of what we should see in order to properly place sensors. |
 |
| |
| |
| What you will receive: |
| In approximately 5 business days, you will receive your AutoCAD drawing back with an additional Lutron layer added and a sensor bill of material. This layer will show the placement of each sensor, sensor model number, placement orientation, and you will also have the ability to see the major and minor coverage range of each sensor. |
 |
| |
| |
| Note: |
| This service is a tool to help specify occupancy sensors. Placement of sensors is only as accurate as the information supplied to Lutron. All sensor locations are approximate and may have to be adjusted. Please refer to all manufacturers installation instructions prior to installation. |
| |
| |
| AutoCAD Layout FAQs |
|