Interactive Color Selector

RadioRA system components are available in a wide variety of colors and styles to best suit your needs.  Click here to view the Interactive Color Selector.

RadioRA Dimmers and Switches
Each dimmer or switch controls one zone, or area, of light in a RadioRA system. Lamp dimmers each control one lamp. Accessory dimmers and switches are used to control the lights locally from up to 9 additional locations.

Dimmers (wall-mounted)

Switches (wall-mounted)

Lamp Dimmer

GRAFIK RATM Multi-Zone Lighting Control

GRAFIK Eye® Interface

RadioRA Master Controls
Master controls provide control and monitoring for all the lights in a RadioRA system.

Large Button Master Controls (wall-mounted)

Slim Button Master Controls (wall-mounted)

Plug-in Tabletop Master Controls

Cordless Tabletop Master Controls

RadioRA System Controls and Enhancements
System controls are used for system setup and to maintain reliable communication among all components. The car visor remote and multi-function entry master control allow your RadioRA system to be controlled

ChronosTM System Bridge and Timeclock

RF Signal Repeater

Car Visor Control Transmitter

Multi-Function Entry Master Control

RadioRA Interfaces
Interfaces integrate RadioRA with other systems and devices, enhancing the functionality.

Infrared Interface and Repeating Kit

RS-232 Interface

Switch Closure Interface

SivoiaTM Control

Telephone Interface

Astronomical Timeclock

RadioRA Dimmers

Dimmer		Accessory Dimmer

Use a RadioRA Dimmer to replace one control point for lights.  Use RadioRA Accessory Dimmers at any additional control points.

• Install RadioRA Dimmers in place of standard switches
• Fine-tune the light intensity and turn lights on and off from RadioRA Master Controls
• Green indicator lights glow softly as nightlight when room light is off
• Bring lights on to full intensity by quickly tapping the dimmer twice
• Fade lights off over a 10-second period by pressing and holding the dimmer
• Use with Lutron Claro or Satin Colors screwless wallplates, sold separately

RadioRA Dimmer for Incandescent and Magnetic Low-Voltage Lighting

• Control up to 1000W/VA* of incandescent and/or magnetic low-voltage lighting from up to 10 locations
• For loads up to 600W/VA* (minimum 50W/VA):  Model # RA-6D-**
• For loads up to 1000W/VA* (minimum 50W/100VA):  Model # RA-10D-***

*   Derating required in multi-gang installations. For higher wattage loads, see the dimmer with neutral below

**  RA-6D- can be used in place of RA-600L-, RA-600LM-, RALV-600L-, and RALV-600LM-

*** RA-10D- can be used in place of RA-1000L-, RA-1000LM-, RALV-1000L-, and RALV-1000LM-

RadioRA Dimmer for Electronic Low-Voltage Lighting

• Controls up to 500W* of electronic low-voltage and/or incandescent lighting from up to 10 locations
• Minimum load is 40W
• Requires neutral wire connection
• Model # RA-5NE-**

*   Derating required in multi-gang installations. For higher wattage loads, see the dimmer with neutral below

**  RA-5NE- can be used in place of RAELV-500L- and RAELV-500LM-

RadioRA Dimmer with Neutral for Incandescent and Magnetic Low-Voltage Lighting or Power Boosters and Interfaces

• Control power boosters and interfaces or up to 600W/VA* of incandescent and/or magnetic low-voltage lighting from up to 10 locations
• Minimum load is 10W/VA
• Requires neutral wire connection
• For incandescent and/or magnetic low-voltage lighting loads up to 2000W/VA, use with Power Booster (Model # NGRX-PB-WH)
• For electronic low-voltage lighting loads up to 1000W, use with Electronic Low-Voltage Interface (Model # ELVI-1000)
• For fluorescent lighting loads (except Tu-Wire), use with Fluorescent Dimming Ballast Interface (Model # GRX-FDBI-16A-120) and Electronic Fluorescent Dimming Ballasts (see Ballasts)
• Model # RA-6ND-**

*   Derating required in multi-gang installations. For higher wattage loads, use a power booster or interface

**  RA-6ND- can be used in place of RAN-600LM-

RadioRA Dimmer for Fluorescent Lighting (Tu-Wire® Only)

• Controls up to 5A of fluorescent lighting from one location when used with Lutron Tu-Wire Fluorescent Dimming Ballasts
• Requires neutral wire connection
• Single-location only. May not be used with accessory dimmers for multi-location installations
• Model # RAN-FTU-5A-"color"-CPN1550

RadioRA Accessory Dimmer

• Use with a RadioRA dimmer to control lighting from up to 9 additional locations
• Model # RA-AD-

Colors:  All 19 colors available.  Click here to view the Interactive Color Selector.

Back to top

Switch		Accessory Switch

Use a RadioRA Switch to replace one control point for lights.  Use RadioRA Accessory Switches at any additional control points.

• Install RadioRA Switches in place of standard switches
• Each RadioRA Switch controls one zone, or area, of light
• Tap switch to turn lights on and off
• Use with Lutron Claro screwless wallplates, sold separately

RadioRA Switch

• Controls up to 8A* of incandescent, fluorescent, magnetic low-voltage, electronic low-voltage, and high-intensity discharge lighting loads from up to 10 locations
• Requires neutral wire connection
• Model # RA-8ANS-**

*   Derating required in multi-gang installations. For higher wattage loads, see the dimmer with neutral below

**  RA-8ANS- can be used in place of RAS-8L- and RAS-8LM-

RadioRA Accessory Switch

• Use with any RadioRA Multi-Location Switch to control lighting from up to 9 additional locations
• Model # RA-AS- 

Colors:  All 19 colors available.  Click here to view the Interactive Color Selector.

Back to top

• Allows selection of preset lighting scenes and monitoring of lights
• Available in 3 different button configurations so that you may choose what is best for you
• Orange indicator lights provide feedback when button is pressed
• Model #:

  RALB-2W-SD-		(2-button)
  RALB-5W-AO-		(5-button with all on and all off)
  RALB-5W-RL-		(5-button with raise/lower)

Colors:  All 19 colors available.  Click here to view the Interactive Color Selector.

Back to top

• Allows selection of preset lighting scenes and monitoring of lights
• Available in 6 different button configurations so that you may choose what is best for you
• Orange indicator lights provide feedback when button is pressed
• Model #:

  RAMC-5W-		(5-button)		RAMC-5W-RL-		(5-button with raise/lower)
  RAMC-10W-		(10-button)		RAMC-10W-RL-		(10-button with raise/lower)
  RAMC-15W-		(15-button)		RAMC-15W-RL-		(15-button with raise/lower)

Colors:  All 19 colors available.  Click here to view the Interactive Color Selector.

Back to top

• Allow selection of preset lighting scenes and monitoring of lights
• Available in 6 different button configurations so that you may choose what is best for you
• Orange indicator lights provide feedback when button is pressed
• Model #:

  RAMC-5T-	(5-button)		RAMC-5T-RL-	(5-button with raise/lower)
  RAMC-10T-	(10-button)		RAMC-10T-RL-	(10-button with raise/lower)
  RAMC-15T-	(15 button)		RAMC-15T-RL-	(15-button with raise/lower)

Colors:

		White
		Black

Back to top

• Allow selection of preset lighting scenes and monitoring of lights
• Available with or without raise and lower buttons
• Provides portable control of lights throughout the home
• Runs on 2 "AA" batteries to allow convenient portable control
• Orange indicator lights provide feedback when button is pressed
• Model #:

  RAMC-10C- (10-button)

  RAMC-10C-RL- (10-button with raise/lower)

Colors:

		White
		Black

Back to top

• May serve as the main RF signal repeater in a system
• Bridges two RadioRA systems as the main repeater in both, allowing up to 64 dimmers/switches and 24 master controls/interfaces to be installed in a single home
• Provides a powerful, built-in astronomical timeclock that simulates daily routines with the "Away" mode, giving the appearance that someone is home
• Allows three contact closure inputs to activate two fully-programmable scenes plus a special security scene
• Supports 17 whole-home scenes (15 rooms/scenes plus "ALL ON" and "ALL OFF"), which can be acessed via any button on a master control or via the RS-232 connection

Back to top  

• Required for system setup and diagnostics of RF communications
• Ensures error-free communication between system components
• Re-sends every signal sent through the system and eliminates cross-talk with neighboring RadioRA systems
• Model #:  RA-REP-WH

Back to top  

• Allows local control of Sivoia motorized window treatments
• Motorized window treatments can be opened, closed, raised, lowered, or set to one of three preset levels from the local control or a master control
• Green indicator lights show current preset status of motorized window treatments
• Model # RA-SVC-

Colors:  All 19 colors available.  Click here to view the Interactive Color Selector.

Back to top  

• Allows GRAFIK Eye Preset Lighting Controls to be used as local lighting controls in conjunction with RadioRA Dimmers and Switches
• Provides direct control of a GRAFIK Eye lighting control through RadioRA
• Each interface counts as one control toward the RadioRA system maximum of 32 local controls
• Model # RA-GRXI-WH

Back to top

• Provides control of home lighting from the car--turn lights on as you arrive, and off as you leave
• Provides control of garage doors and gates
• Clips conveniently to your car's sun visor
• Use with the Multi-Function Entry Master Control (RAMC-MFE-)
• Model # RA-VCTX-

Colors:

White

Back to top

• Can be used with RadioRA Car Visor Control Transmitters
• Provides control of garage doors and gates
• Inputs allow any class 2 input device to control the lights, such as security systems, motion sensors, and timeclocks
• Model # RAMC-MFE-

Colors:

White

Back to top

• Provides control of RadioRA system from an IR remote control
• Used to select up to 15 unique lighting scenes, plus all on and all off
• Model # RA-IR

Back to top

• Allows RadioRA to be controlled through home automation systems
• Provides feedback on:  RadioRA system actions, on/off, status of RadioRA Dimmers, Switches, and GRAFIK Eye Interfaces
• Model # RA-RS232

Back to top