| |
 |
| Elegant appearance in a thin profile. |
Dimmers | Switches |
Fan-Speed Controls | Accessories
Wallplates | Multigang and Metal
Wallplates | Colors | Supplemental
Information
|
|
-
Lutron's premier wallbox line
-
One model number for single pole or 3-way, incandescent or magnetic low-voltage
-
no visible metal heatsink for improved appearance
-
automatic multigang alignment for quick and easy installation
-
Heavy duty components for surge protection and long product life
|
| Specification Series Standard Features |
-
Voltage compensation
-
Power failure memory
-
Superior RFI suppression
|
 Listed |
| Lutron controls are rated at 120VAC, 60Hz unless otherwise noted. |
DIMMERS
| Product |
Description |
Maximum Capacity 1 |
Model # |
Instruction Sheets |
 |
 |
Incandescent/Magnetic Low-Voltage |
|
Preset 2 |
single pole / 3-way with
hidden locator light |
600W/VA |
V-600- |
030409a.pdf |
| |
single pole / 3-way with
hidden locator light |
1000W/VA |
V-1000- |
030409a.pdf |
| |
Use with VETS-R switches below for multi-location
switching. |
 |
Electronic Low-Voltage
|
|
| |
For control of electronic low-voltage loads, use V-600
with Hi-Power 2*4*6. |
 |
Fluorescent
with Hi-lumeŽ and Eco-10T (ECO-Series) Electronic Ballasts |
|
|
Preset Dimmer
Single Pole/Multi-Location 20 ballasts/8A |
|
VF-10- |
|
|
Use with Lutron Hi-lume and Eco-10 (ECO-Series) line voltage
control electronic dimming ballasts only. Requires neutral wire connection. For
multi-location switching use with Vareo auxiliary electronic tapswitches,
VETS-R-. Not for use with mechanical 3-way or 4-way switches. Does not have
hidden locator light. |
|
Click here to see how much energy you can save with a Lutron
dimmer:
|
| |
SWITCHES
| Product |
Description |
Maximum Capacity 1 |
Model # |
Instruction Sheets |
|
|
|
Incandescent / Magnetic Low-Voltage /
Fluorescent (Magnetic Ballasts) |
|
Electronic tapswitch 2 |
single pole / 3-way |
1000W/VA |
VETS-1000- |
|
| Auxiliary electronic tapswitch |
Use with Vareo
dimmers or switches |
for up to 9 additional locations |
VETS-R- |
|
Electronic tapswitch 3
with status light |
single pole / 3-way |
1000W/VA |
VETS-1000-SL- |
|
| Auxiliary electronic tapswitch with status light |
Use with VETS-1000-SL- |
for up to 4 additional locations |
VETS-A-SL- |
|
| Electronic Low Voltage, Flourescent Switching with
Electronic Ballasts7 |
single pole / 3-way |
1000 VA |
VETN-1000- |
|
|
|
| |
FAN-SPEED CONTROLS
| Product |
Description |
Maximum Capacity 4 |
Model # |
Instruction Sheets |
| |
Fan-speed controls and accessories shown are Nova T*
products that coordinate with the Vareo line. |
 |
Quiet Controls
For use with one ceiling paddle fan. |
|
| |
For use with one ceiling paddle fan. |
Slide-to-off
|
single pole, 3-speed |
1.5A |
NTFSQ- |
|
|
|
| |
|
|
| |
|
|
| |
ACCESSORIES
| |
Product |
Maximum Capacity 4 |
Model # |
Instruction Sheets |
 |
Receptacle |
15A, 125V |
NTR-15- |
|
 |
GFCI Receptacle 5 |
15A, 125V |
NTR-15-GFCI- |
|
 |
Telephone Jack 6 |
6 conductor |
NT-PJ- |
|
 |
Cable TV Jack 6 |
75 Ohm,
coaxial cable |
NT-CJ- |
|
|
|
| |
WALLPLATES
Lutron exclusive single-gang wallplate provided with product. To
order single-gang replacement wallplates use the Nova T* single-gang wallplate
ordering procedure. |
| |
Product |
Description |
Model # |
 |
Two-gang wallplate |
for two dimmers or switches |
VWP-2- |
 |
Two-gang wallplate |
for two receptacles or jacks |
VWP-2R- |
 |
Two-gang wallplate |
for one dimmer or switch and one receptacle or jack |
VWP-2CR- |
 |
Two-gang wallplate |
for one receptacle or jack and one dimmer or switch |
VWP-2RC- |
 |
Three-gang wallplate |
for three dimmers or switches |
VWP-3- |
 |
Four-gang wallplate |
for four dimmers or switches |
VWP-4- |
When ganging Vareo products, side sections much be removed, see
Ganging and Derating Information.
|
|
| |
|
|
| |
|
|
COLORS
| Add appropriate suffix to model number to order. |
| White (WH) |
Taupe (TP) |
Metal Wallplate Finishes |
| Beige (BE) |
Dusty Rose (DR) |
Bright Chrome (BC) |
| Ivory (IV) |
Brown (BR) |
Bright Brass (BB) |
| Gray (GR) |
Black (BL) |
Satin Brass (SB) |
| Example: V-600-WH |
Example: V-1000-WH + NT-O-NFB |
| Note: All Vareo products must be ordered in
color. Replacement and multigang Vareo plates do not include inserts (sliders,
buttons, receptacle, phone and cable TV jack faces). |
To order metal wallplates for Vareo controls use Nova T* metal
wallplate ordering procedure (not VWP model numbers). |
| click here for more information on the
Colors of Lutron |
|
MULTIGANG AND METAL
WALLPLATES
Multigang
Vareo multigang wallplates (VWP series) are listed on this page. Note: If mixing
Vareo and Nova T* products in the same multigang installation, Nova T*
multigang wallplates and the Nova T* ordering procedure must be used.
Metal Wallplates
To order metal wallplates for Vareo use Nova T* metal wallplate ordering
procedure (not VWP model numbers).
When ordering products for use with metal wallplates, the product and wallplate
must be ordered separately. There are no special ordering procedures for
controls that require a metal wallplate.
Example: V-600-WH + NT-O-NFB-BB
(Dimmer) (Wallplate)
|
| SUPPLEMENTAL INFORMATION
Back to Top
FOOTNOTES
1 For capacities in multigang
installations see Ganging and Derating
Information.
2 Do not use with mechanical 3-way or
4-way switches. Use only one V-600-, V-1000- or VETS-1000- per lighting
circuit. For additional switching locations use up to nine VETS-R-.
3 Do not use with mechanical 3-way or
4-way switches. Use only one VETS-1000-SL- per lighting circuit. For additional
switching locations use up to four VETS-A-SL-.
4 No derating required if ganged.
5 GFCI receptacles are only available in
white, ivory, gray, brown, black, bright chrome, bright brass and satin brass.
6 A physical barrier (partition) must
exist when ganging with 120V products.
7 Requires neutral wire connection
|
