Lutron Viseo CSI Specification

2.0x LCD-Based Lighting Control Wallstation
A. LCD-based wallstations shall be Lutron Viseo Wallstation 
Controls.
B. Control must be capable of accepting software 
enhancements without the need for hardware 
modifications
C. LCD screen must provide 320x240 pixels of resolution.  
Contrast and backlight brightness must be adjustable.
D. Control must automatically configure itself upon installation 
with all building zone names, scene names, area names, 
scene intensities, fade times, delay times, and timeclock 
status from preprogrammed information from system 
processor.
? Control will display zone names, scene names, and 
area names in English, French, Spanish, Dutch, 
German, Italian, or Portuguese if user enters this 
information into the processor.
? Control menus and help screens can be displayed 
in English, French, Spanish, Dutch, German, 
Italian, or Portuguese. 
E. Control must be capable of accessing every area, scene, 
and zone within the associated architectural lighting control 
processor.  Controller must allow user to:
? view and modify the scene status of an area.
? temporarily modify zone intensities in an area.
? view timeclock status for all areas.
? enable or disable timeclock for an area.
? permanently modify zone intensities, zone delay 
times, and zone fade times in an area via online or 
offline programming. Scene programming must be 
accomplished without the use of an "enter" or 
"store" button.  Programming may be accomplished 
either online or offline.
- Online programming -- Allows scene 
programming via real-time adjustment of 
lighting zones.  Lighting levels change 
during on-line programming.
- Offline programming -- Allows for scene 
adjustments that are previewed via numeric 
intensities and bargraphs.  Lights in space 
shall not change during off-line 
programming.
F. If power to lighting control system is lost, LCD-based 
control must automatically update when power is restored.  
Light levels in area where power to system processor is 
lost shall not change or turn off as a result.
G. Control shall have several configuration options for each 
area.  Each option limits user access to the system.  Each 
area shall be configurable to any of the following access 
levels from the control: 
? Hidden (can not be selected for the control’s default 
area)
? Monitor only
? Change scenes
? Programmable
H. Control programming and setup configuration may be 
restricted via user-modifiable numeric passcode.
	October 11, 2001